RCA 2-9398 manual Installing the Battery

INSTALLING THE BATTERY

If you are replacing the battery, be sure to disconnect the line cords from the back of the unit.

1.Remove the base plate by pressing down the tabs and lifting it from the base.

2.Loosen the screw on the battery compartment door and open the door.

3.Insert the battery as shown in the diagram inside the battery compartment.

4.Close the battery door, tighten the screw, and then replace the base plate.

LOW BATTERY INDICATORS

When the battery begins getting to a low level, the battery symbol in the display flashes indicating that you need to replace the battery.

NOTE: When the battery is low, AC power must be connected in order to edit, delete, or input Caller ID information.

BATTERY

10/22 07:15AM

Low Battery indicator flashes when battery power is low.

When battery power reaches a critically low level, REPLACE BATTERY appears in the display.

NOTE: If the REPLACE BATTERY message appears in the display, you need to replace the 9-volt battery. It is important that you replace the battery as soon as possible in order to retain the information in the Caller ID memory.

10/22 07:15AM

REPLACE BATTERY

REPLACE BATTERY appears when the battery power is critically low.

3