RCA 2-9398 manual Hold, Mute, Do not Disturb

HOLD

Use the HOLD button to interrupt a phone conversation without hanging up; then resume the conversation on the same phone or an extension.

1.Press HOLD to place a call on hold. If you're using the handset, you can put it back in the cradle.

NOTE: While a call is on hold, the HOLD indicator will flash, and the phone will beep about every 15 seconds to remind you that the line is on hold.

2.Press the SPEAKER button, pick up the handset, or press HOLD (if the handset is not in the cradle) to resume the conversation.

MUTE

The MUTE button deactivates the microphone for both the speakerphone and the handset, so that anything you say cannot be heard by the caller on the other end of the line.

•Press MUTE once to turn on the feature.

•Press MUTE again to continue the phone conversation.

•Picking up the handset while the speakerphone is muted automatically turns off the mute function.

DO NOT DISTURB

The Do Not Disturb feature lets you mute the ringer volume for a predetermined amount of time so that you are not interrupted by incoming phone calls.

USING DO NOT DISTURB

•Press the NO DISTURB button (the indicator starts blinking). The Do Not Disturb feature is automatically activated for one hour.

•To turn off the feature, you can press the NO DISTURB button again, pick up the handset, or press SPEAKER (the indicator turns off).

PROGRAMMING THE DO NOT DISTURB TIME

You can adjust the amount of time it is active by following these steps:

1. Press the STORE button.

10/22 07:15AM

DND - 2 HOURS

2.Press a number key (0-9) to choose the number of hours you want the feature to remain active from unlimited duration to nine hours

(0 = unlimited duration).

3.Press the STORE button again.

4.Press the NO DISTURB button.

12