MEMORY DIALING
Each of the 10 memory buttons is capable of storing two separate phone numbers that are up to 31 digits. Each MEMORY button accesses an upper and a lower memory position. You can dial the phone numbers stored in the upper position with one touch (press the MEMORY location button). You can dial the phone numbers in the lower memory position by pressing two buttons (SHIFT and the MEMORY location button).
Note that if no keys are pressed for 15 seconds, the Memory feature automatically turns off.
STORING A NUMBER IN MEMORY
1.Press the STORE button.
2.Dial the number to be stored (up to 31 digits).
The number digits scroll from right to left across the display.
3.Press the STORE button again.
4.Press a MEMORY location button or
STORE 10/22 07:15AM
ENTER NUMBER
➔
STORE 10/22 07:15AM
ENTER DIGITS
MEMORY locations
Press SHIFT and then a MEMORY location button to store the number.
5. Remove the memory directory from |
underneath its plastic cover and |
record the name of the person |
whose number you stored. |
SHIFT button
LOWER |
| STORE |
|
| CALLER ID |
DELETE | REVIEW | DIAL |
STORE button
NEW
CALL
INSERTING A PAUSE IN THE DIALING
SEQUENCE
Press the PAUSE button to insert a delay in the dialing sequence of a stored telephone number when a pause is needed to wait for a dial tone (for example after you dial 9 for an outside line, or to wait for a computer access tone). Each pause counts as 1 digit in the dialing sequence.
FLASH | PAUSE | ALARM | MENU |
1 | ABC2 | DEF3 | BUSY/REDIAL |
| |||
GHI4 | JKL5 | MNO6 | DN DISTURB |
| |||
PRS7 | TUV8 | WXY9 | HOLD |
| |||
TONE | 0 | # |
|
OPER |
| SPEAKER | |
|
|
| |
MUTE | - | VOL + |
|
15
