![](/images/new-backgrounds/1251216/25121629x1.webp)
TEMPORARY TONE
If you have Pulse (rotary) service, and want to access customer calling services that require Tone dialing (such as getting information from a local bank), you can use this feature.
1.Press the TONE button ( * ) after you have connected to the customer calling service to enable Tone dialing.
2.When you hang up, the phone automatically resumes Pulse dialing.
FLASH BUTTON
Press the FLASH button to activate customer calling services such as call waiting or call transfer, which are provided by your local phone company. Do not use the hook switch or the speaker button because you might hang up the phone.
ADJUSTING THE FLASH BUTTON TIMING | 10/22 | 07:15AM |
If you have trouble getting the FLASH | FLASH = .6 |
|
button to work properly, you might need to |
| |
|
| |
adjust the amount of time that the FLASH |
|
|
button is active. The FLASH default time is |
|
|
.6 seconds. To adjust the time: |
|
|
1.Press the STORE button.
2.Press a number key
of time that the FLASH button is active (from .1 to .9 seconds).
3.Press the STORE button.
4.Press the FLASH button.
PAUSE BUTTON |
|
10/22 07:15AM |
When you store phone numbers in memory, you might need to insert a delay in the dialing,
for example when you must dial 9 to get an outside line. Press the PAUSE button at the point in the dialing sequence that requires the delay.
ADJUSTING THE PAUSE BUTTON TIMING
If you have trouble getting the PAUSE button to work properly, you might need to adjust the amount of time that the PAUSE button is active.The pause default time is AUTO TONE DETECT. To adjust the time:
1.Press the STORE button.
2.Press a number key
3.Press the STORE button.
4.Press the PAUSE button.
13