Connecting Video Equipment for Output From the Computer
You can connect a VCR to record computer images and audio on videotape. The VCR records
what is happening on the computer’s monitor, sounds generated by the computer, and
speech spoken into a microphone if one is connected. This capability is useful for creating
video presentations or software demonstrations.
Note: The video out ports are primarily intended for recording what is happening on the
computer’s monitor. You can use video-editing software to save captured and edited video
on a VCR if the video-editing software supports the use of a single monitor. However, to get
full video-editing support with independent monitor and video (or TV) output, you need to
purchase and install a third-party video capture PCI card.
To connect a VCR for output from the computer, do the following:
1Shut down the Macintosh and turn off the VCR.
2Attach one end of the video cable to the Video In port on the VCR.
Follow the directions that came with the VCR.
3Plug the other end of the video cable into either the S-video output port(Æ) or the yellow
composite video output port (Â) on the Macintosh.
If the S-video connector doesn’t slide easily into the port, check the pin alignment and try
again. Don’t use force, which could damage the computer or cable.
4Plug the RCA-type connectors on the audio cablesinto the left and right Audio In ports on
the VCR.
5Plug the RCA-type connectors on the audio cables into the left and right audio output ports
(-) on the Macintosh.
If the cable is color-coded, the red connector is for the right port, and the black or white
connector is for the left port.
28 Chapter 2