7Holding the back cover by the stand, tilt it slightly and align the tabs on the top edge of the back cover with the slots on the top edge of the computer. Rotate the back cover down and gently press until it fits snugly on the computer.

8Turn the three captive screws clockwise to tighten them. Be careful not to over-tighten the screws, as you may strip the screw heads.

Phillips

Raise stand

screwdriver

 

Tighten 3 screws

Chapter 4 Enhancing Your Computer

45

Page 45
Image 45
Apple iMac G5 manual Screwdriver Tighten 3 screws