To install a memory module:

1Turn your computer off by choosing Apple (K) > Shut Down. Disconnect all cables and the power cord from your computer.

2Place a soft, clean towel or cloth on the desk or surface. Hold the sides of the computer and slowly lay it down so the screen is flat against the surface and the bottom is facing towards you.

Phillips

Raise stand

screwdriver

 

Loosen 3 screws

3Raise the stand and use a Phillips #1 screwdriver to loosen the three captive screws at the bottom of the computer by turning them counter-clockwise.

42

Chapter 4 Enhancing Your Computer

Page 42
Image 42
Apple iMac G5 manual To install a memory module