INSTALLATION INSTRUCTIONS
ROUGH-IN MEASUREMENTS:
See Diagram 3A, below
B
A
3A
MODEL | A | B |
| (From center of overflow pipe | (From center of |
| to outside rim) | drain to tub rim) |
|
|
|
Infinity I | 3" | 24 1/2" |
Infinity II | 2 3/8" | 9 1/2" |
Infinity III | 1 3/8" | 10 1/2" |
Infinity IV | 3" | 11 3/4" |
Infinity V | 3 1/2" | 11" |
Infinity VI | 5" | 11 3/4" |
Infinity VII | 5" | 11" |
Infinity VIII | 7" | 14 1/2" |
PLEASE NOTE: THE MANUFACTURER ACCEPTS A 1/4” VARIANCE. THERE ARE VARIATIONS ON EACH TUB AND SPECIFICATIONS ARE SUBJECT TO CHANGE AS WE IMPROVE UPON OUR PRODUCT AS REQUIRED.
THE DIMENSIONS NEEDED FOR SITE PREPARATION AND STRUCTURE BUILDING WILL DIFFER; AQUATIC INDUSTRIES, INC. ASSUMES NO RESPONSIBILITY FOR PREPARATORY WORK.
FAST FILL WATERFALL SPOUT:
Depending on your model, your Fast Fill Waterfall Spout will be stubbed as in Diagrams 3B or 3C.
3B
FROM VALVES
Fast Fill Waterfall Spout is stubbed out with a 3/4" male threaded PVC fitting.
3C
FROM VALVES
Fast Fill Waterfall Spout is stubbed out with a 3/4" female threaded PVC fitting.
See Diagram 3D for connecting the hot and cold valves.
3D
AQUATIC INDUSTRIES, INC. | 11 |
