Aquatic Infinity Series owner manual Infinity JET Sequencer Control see Diagram 6B

OPERATION of

INFINITY SERIES WHIRLPOOLS

BATHSIDE CONTROL SYSTEMS (continued):

INFINITY JET SEQUENCER CONTROL (SEE DIAGRAM 6B):

1.To Turn Jet Sequencer On: Pressing the “On/Off” button will turn the jet sequencer on. The system will then perform an indicator light test and open all valves. Pressing the “On/Off” button a second time will turn the jet sequencer off. A built-in timer automatically turns the jet sequencer off after 2 hours, unless manually deactivated first. Note: Pump must be turned on for the jet sequencer to be effective (see “Infinity On/Off with Heater Control” above.)

2.To Choose Sequences: Press the “Sequences” button to select one of the 7 preprogrammed massage sequences. Note: Only the first 6 sequences have corresponding indicator lights. The remaining sequences do not have indicator lights. A preview of the massage is displayed for 5 seconds after selecting a sequence.

3. To Change Speeds: Press the “Speeds” button to			6B
change the time interval between each step of the
selected massage sequence.
Speed 1:	15	Seconds between each step.
Speed 2:	10	Seconds between each step.
Speed 3:	5	Seconds between each step.

4.To Pause: Press the “Pause” button to interrupt a massage sequence and prolong the action of a jet set for a combination of sets. Pressing a second time will resume the massage sequence. The “Pause” indicator light will be on in “Pause” mode.

Other Features:

•Automatic purge: Thirty minutes after the jet sequencer has shut off, the solenoids will open and close to drain any water from the pipes.

INFINITY AIR BATH CONTROL (SEE DIAGRAM 6C):

1.To Turn Air Bath System On: Pressing the On/Off button will turn the blower on in “constant mode.” Once the blower is on, pressing a second time will turn the

blower off. The light indicator will illuminate when the		●
system is on. The blower and the blower heater will
automatically shut off after a 20-minute period.
2. To Change Modes: Pressing the Mode	button	6C
alternates the blower modes of operation from constant

mode to wave mode and then to pulse mode.

•Constant Mode: Consists of a constant blower level with no change. The light indicator will also follow the blower intensity set by the user.

•Wave Mode: Consists of a gradual change of blower level to generate a gentle massage effect. The light indicator will also follow the blower intensity.

•Pulse Mode: Consists of an instant change of the blower level to generate a massage effect. The light indicator will also pulse as the blower does.

AQUATIC INDUSTRIES, INC. 17