Arcam AV888, AVR600 manual Mode key IR punch-through, Resetting the CR102

Mode key IR punch-through

The Mode key IR punch-through default is ‘on’.

Example: To set the Mode key IR punch- through to AMP

1.Press and hold Suntil the power LED blinks twice:

**.

2.Press 971. The power LED blinks twice: *

*.

3.Press Ato punch through IR from it.

Now, whenever you press and release a Mode key, the IR data assigned to AMP is transmitted, no matter what the current mode is (i.e. it ‘punches through’ any other device).

To cancel Mode key IR punch-through

1.Press and hold Suntil the power LED blinks twice:

**.

2.Press 971. The power LED blinks twice: *

*.

3.Press S until the power LED blinks twice: **.

Resetting the CR102

Resetting the CR102 will erase all learned functions across all modes, as well as some other programmed functions like Macros. It will not reset the Device Mode keys; these will remain programmed to your choice of component.

1.Press and hold Suntil the power LED blinks twice:

**.

2.Press 980. The power LED blinks four times:

****.

3.Press and hold Suntil the power LED blinks twice:

**.

4.Press 993.

5.Press A. The power key LED blinks twice: **.

6.Press and hold Suntil the power LED blinks twice:

**.

7.Press 971. The power LED blinks twice: *

*.

8.Press A. The power key LED blinks twice: **.

Command summary

Direct code setup

(e.g. AV mode, NNNN=code number) A S**NNNN **P

Library search

(e.g. AV mode)

A S991**P[until unit turns off Sto save

Code blink back

A S990**

1count blinks for firstN

2count blinks for second N

3count blinks for third N

4count blinks for fourth N

Code learning

(e.g. AV mode fast forward key)

S**975**A (*(many rapid blinks)

(Press key on original remote that you wish to copy) **S**

Delete a learned function

(e.g. AV mode fast forward key)

S**975**A ((**

Delete all learned functions with a device

(e.g. AV mode)

S**975A A

Creating macros

(e.g. SRCH key)

S**995H A PW PZ PS

**

Deassign macro

S**995H S**

Key mover

(e.g. SAT mode, DISP key to MENU key)

Z S**994DU

Mode mover

(e.g. change SAT to TV(AV))

S**992A Z

Restore device mode

(e.g. restore SAT)

S**992Z Z

Locking/unlocking a mode

(e.g. DVD mode)

D S**982** (i.e. two blinks for lock)

D S**982****

(i.e. four blinks for unlock)

Cancel all volume punch-through

S**993+****

Restore volume punch-through

S**993A**

Mode key IR punch-through

S**971**A

Cancel mode key IR punch-through

S**971**S**

NOTE

As elsewhere in this Handbook, a single ‘blink’ of the red LED behind the power button is indicated by the symbol *.

Device codes

The tables that begin on page 58 (in the final section of this Handbook) list the four-figure codes for different manufacturers’ devices.

Use these when setting your CR102 up to control your devices, as described in Method 1 (see page 25).

If more than one code number is listed, try the first number. If the results are unsatisfactory, continue trying the numbers for that manufacturer to get the best ‘fit’ with the functionality required.

If the manufacturer of your equipment is not listed, you can try Method 2, the Library Search (see page 25). This allows you to scan through every set of codes contained in the CR102’s memory.

English

E-53