Arcam AVR600, AV888 manual Phono, Analogue audio, Front panel AUX input, MCH input, inputs, E-10

Phono

Analogue audio

Front panel AUX input

�����

�� ����

� �

��	�	���������
��	��
���	���

This input can be connected directly to a record deck which has a direct output from a moving magnet (MM) cartridge.

MCH input

����

�

��

��

�

���

���

�
�	���������������������

inputs

TAPE, CD, AV, DVD, SAT, VCR,

PVR

Connect the left and right inputs to the left and right outputs of your source

The front panel AUX input can be used as an analogue or optical digital input.

���	������	For analogue sources, use a stereo
		3.5mm lead; for digital sources
		use a 3.5mm optical lead. The
		front input is also used for the

�	�		This multichannel analogue
���	�		audio input can be connected to
		�����������	a source device which outputs
���	���		surround sound on its analogue
			outputs. Such devices typically
��	��
			include DVD-Audio and SACD
���	���		players. This input does not
			pass through any of the audio

�

���

���

�

���

���

�

����

�

�

���

�

equipment.

Analogue record outputs

VCR OUT, PVR OUT, TAPE OUT

auto-setup microphone input.

Front panel PHONES socket

This socket accepts headphones with an impedance rating between 32Ω and 600Ω, fitted with a 3.5mm stereo jack plug. The headphone socket is always active,

processing in the unit, therefore

functions such as speaker size

and distance from the listening

position should be copied from the Setup menus into the Setup menus of your multichannel source. Note however that speaker level trims are applied to the MCH input on the unit. Therefore speaker level trim settings on multichannel source equipment should be left unset at zero.

Analogue pre-amplifier outputs

All pre-amplifier analogue outputs are buffered, have a low output impedance, are at line level and follow the Zone 1 volume control setting. They are able to drive long cables or several inputs in parallel if required.

For more information on connecting speakers or additional power amplifiers, see page 18 and 47.

Connect the left and right outputs to the left and right input sockets of your cassette

deck, PVR or VCR (usually labelled ‘RECORD’). The PVR and VCR connectors may be used for a second and third cassette deck. These outputs are fixed at full line level.

except when AVR600 is muted.

When the headphone jack is inserted, the speaker outputs and analogue pre-amplifier outputs are automatically muted.

E-10