Arcam DV27 Technical specifications, General, Video outputs, Audio outputs, Accessories supplied

Technical specifications

General

Power Requirements	115V or 230V AC, set by voltage selector switch on rear panel
Power consumption	<30W
Dimensions	430mm x 90mm x 280mm
Weight	net: 6.2kg
	packed: 7.8kg
Video outputs
Composite video	1 x gold plated phono:
	1V pk-pk into 75Ω
S-Video	1 x 4-pin mini-DIN:
	Y 1V pk-pk in 75Ω , C 0.3V pk-pk into 75Ω
Component video	3 gold plated phono sockets:
	Y 1V pk-pk into 75Ω ; Pb 0.7V pk-pk into 75Ω ; Pr 0.7V pk-pk into 75Ω .
SCART socket with RGB video	All 0.7V into 75Ω , composite video 1V into 75Ω , and stereo audio.
	Auto switching of TV with aspect ratio control
Progressive scan video	Pure Progressive™ motion adaptive 4-field processing by Silicon Image Corporation
	3 gold plated phono sockets:
	525P component video. Y 1V pk-pk into 75Ω ; Pb 0.7V pk-pk into 75Ω ; Pr 0.7V pk-pk into 75Ω
Audio outputs
Analogue audio outputs	Two pairs of stereo outputs on gold plated phono sockets
Output level	2.2V rms at 0dB signal
Frequency response	20Hz to 20kHz (+0.1db, –0.5dB)
THD+N	<0.005% for 1kHz 0dB signal, measured 22Hz–22kHz, unweighted
S/N	105dB, measured 20Hz–20kHz, unweighted
Digital audio output (IEC958)	PCM/Dolby digital/MPEG/DTS on gold plated phono (coaxial) and TOSLINK (optical)
Accessories supplied
	CR-314 remote control
	2 x AAA batteries
	Mains lead
E&OE

NOTE: All specification values are typical unless otherwise stated.

Continual improvement policy

Arcam has a policy of continual improvement for its products. This means that designs and specifications are subject to change without notice.

18