Using the Mini PC

Adjusting the LCD Screen Display

The LCD screen display can be adjusted by the following key combinations.

+ - Changes Display Mode: LCD-only, CRT-only, LCD/CRT simultaneously

+ - Increases the brightness level.

+ - Decreases the brightness level.

LCD Care

LCD screens are delicate devices that need careful handling. Please pay attention to the following precautions:

ƒWhen you are not using the computer, keep the LCD screen closed to protect it from dust.

ƒIf you need to clean your LCD screen, use a soft tissue to gently wipe the LCD surface.

ƒDo not put your fingers or sharp objects directly on the surface and never spray cleaner directly onto the display.

ƒDo not put pressure on, or store any objects on the cover when it is closed. Doing so may cause the LCD to break.

External CRT Display

You can hook up an external monitor through the 15-pin CRT connector. Three configurations are available:

ƒLCD only

ƒCRT only

ƒLCD and CRT simultaneously

You can switch between these display configurations by pressing the key combination [Fn] + [F4].

14

Page 17
Image 17
Archos 10 user manual Using the Mini PC, Adjusting the LCD Screen Display, LCD Care, External CRT Display