Model IZT 915055, 057, 059, 067, 501 with Serial Numbers Above 10,000

1

2

5

4

2

1

6

 

3 4

5

7

1.

Link

 

2.

Brake Rod

 

 

 

 

3.

Eccentric

 

 

4.

Weldment

 

 

5.

Flange Nut

 

 

6.

Handle Bar

 

 

7.

Control Arm

PE0840

 

 

Figure 27

Serial numbers below 10,000:

Refer to Figure 28 and Figure 30 for Steering.

The steering controls will swing outward when in neutral. In the outward position, each handlebar will contact a switch. The switches must be engaged to start the engine.

When the handlebars are moved inward and forward the link will shift the transmissions forward.

The steering mechanism can be taken apart for inspection and lubrication.

To remove the weldments:

1.Remove the roll pin that holds the weldment on the rod.

2.Remove the link to the transmission.

3.Remove the link to the parking brake locking arm.

4.Slide the weldment off.

Inspect spacers bearings and pivot points for wear. Repair or replace all worn parts. Lubricate with a high quality grease and reassemble.

9 - 26