9.2ADJUSTING STEERING LEVER HEIGHT FOR SERIAL NUMBERS ABOVE 10,000 ONLY
(Figure 30)
1
2
5
3
4
1.Handlebar
2.Steering Lever
3.Mounting Hardware
4.Adjustment Holes
5. Eccentric Spacer | OE0046 |
Figure 30
NOTE: Perform steps 1 and 2 for both steering levers.
1.Remove mounting hardware and move handlebar up or down until the steering levers are at the appropriate height.
2.Install mounting hardware.
NOTE: Align handlebars by adjusting eccentric spacer until the height of handlebars are the same.
Models with serial numbers below 10,000 have a series of holes that line up to insert bolts with nuts. Choose the combination that is most appropriate.
9 - 29