Starting and using
! Before starting the machine make sure the containers NA are filled with the amount described in the manual.
Prime the circuit immediately to prevent damage to the machine.
!After starting the machine, regulate water hardness. That will allow you to keep your machine in perfect order (see Programming).
Close the front panel by pressing firmly in the centre. The machine begins to heat up and the display shows:
RINSING
WARMING UP...
When the right temperature is reached, the machine goes through a rinsing cycle.
| RINSING |
The first time you switch on |
|
1. Open the front panel | The machine dispenses water from the brew unit as it |
by pressing firmly in the | rinses the internal circuits. |
center. |
|
| After rinsing, the machine returns to normal operating |
| conditions. The display shows: |
| SELECT PRODUCT |
| READY FOR USE |
| ! To disable the rinse cycle, see the paragraph on |
| programming the machine. |
2. Remove the bean |
|
container. |
|
(to your convenience, |
|
you can take out |
|
complete container and |
|
fill whenever you want |
|
or even changhe the |
|
container with another |
|
one which is filled, for |
|
example, with decaf |
|
coffee). |
|
3. Pour coffee beans into |
|
the container being care- |
|
ful not to add too many. |
|
Close the lid and replace |
|
the container inside the |
|
machine. |
|
The main switch is in the “O” position. To switch on, press the key in the “I” position.
8
