2.8 Onboard Headers and Connectors
Onboard headers and connectors are NOT jumpers. Do NOT place jumper caps over these headers and connectors. Plac- ing jumper caps over the headers and connectors will cause permanent damage to the motherboard!
Serial ATA2 Connectors | 5 | |
(SATA_4_5) | 4 | |
SATA | ||
(see p.18, 21, 24) | ||
|
Serial ATA3 Connectors | 0 1 | |
(SATA_0_1) | _ | |
SATA | ||
(SATA_2_3) | ||
(SATAIII_M0_M1) | 3 | |
(see p.18, 21, 24) | 2_ | |
| SATA | |
| M0 M1 | |
| SATAIII |
These two Serial ATA2 (SATA2) connectors sup- port SATA data cables for internal storage devices. The current SATA2 interface allows up to 3.0 Gb/s data transfer rate.
These six Serial ATA3 (SATA3) connectors sup- port SATA data cables for internal storage devices. The current SATA3 interface allows up to 6.0 Gb/s data transfer rate.
Serial ATA (SATA) | Either end of the SATA data |
Data Cable | cable can be connected to |
| SATA / SATA2 / SATA3 hard |
| disks or the SATA2 / SATA3 |
| connectors on this mother- |
| board. |
43
