Asus 810 Hardware Setup Procedure, Motherboard Settings, Motherboard Feature Settings DSW

3.HARDWARE SETUP

3.3Hardware Setup Procedure

Before using your computer, you must complete the following steps:

•Check Motherboard Settings

•Install Memory Modules

•Install the Central Processing Unit (CPU)

•Install Expansion Cards

•Connect Ribbon Cables, Panel Wires, and Power Supply

3.4Motherboard Settings

This section explains in detail how to change your motherboard’s function settings through the use of switches and/or jumpers.

WARNING! Computer motherboards and expansion cards contain very delicate Integrated Circuit (IC) chips. To protect them against damage from static electric- ity, you should follow some precautions whenever you work on your computer.

1.Unplug your computer when working on the inside.

2.Use a grounded wrist strap before handling computer components. If you do not have one, touch both of your hands to a safely grounded object or to a metal object, such as the power supply case.

3.Hold components by the edges and try not to touch the IC chips, leads or con- nectors, or other components.

4.Place components on a grounded antistatic pad or on the bag that came with the component whenever the components are separated from the system.

Motherboard Feature Settings (DSW)

Besides jumper settings, some of the motherboard’s onboard functions are adjusted through the DIP switches. The white block represents the switch’s position. The example below shows all the switches in the OFF position.

	DSW
	ON	ON
	1 2 3 4 5	OFF
	1. Frequency Selection
CUW	2. Frequency Selection
	3. Frequency Selection
	4. Frequency Selection
	5. Frequency Selection
CUW DIP Switches

.3 SETUPH/W

Motherboard Settings

ASUS CUW User’s Manual 17