Asus 810 Internal Audio Connectors 4-pin VIDEO, AUX, CD, TAD, Internal Speaker Connector SPKEAR

3.HARDWARE SETUP

16)Internal Audio Connectors (4-pin VIDEO, AUX, CD, TAD)

These connectors allow you to receive stereo audio input from such sound sources as a CD-ROM, TV tuner, or MPEG card. The TAD connector allows the on- board audio to interface with a voice modem card with a similar connector. It also allows the sharing of mono_in (such as a phone) and mono_out (such as a speaker) between the onboard audio and the voice modem card.

VIDEO In (Green)

Left Audio Channel

Ground

Right Audio Channel

AUX In (White)

Left Audio Channel

Ground

Right Audio Channel

CD In (Black)

CUW	Left Audio Channel
	Ground
	Right Audio Channel

TAD In/Out

Modem-In (to Modem)

CUW Internal Audio Connectors

Ground

Modem-Out (from Modem)

SETUP

Connectors

17)Internal Speaker Connector (SPKEAR)

This connector allows you to connect the internal chassis speaker to the onboard audio’s output. This will allow you to use the chassis’ built-in speaker to listen to sounds normally requiring separately purchased external speakers. The ground (GND) wire is usually the black wire and the speaker-out (SPKOUT) is usually the red wire. System beeps and warnings sent through the chassis speaker con- nector is also routed through this internal speaker connector so that there is no need for two speakers.

3 H/W.

1

SPKOUT

CUW	GND
	4

SPKEAR

CUW Internal Speaker Connector

ASUS CUW User’s Manual 37