Asus 810 user manual DIMM Installation, Hardware Setup, System Memory, ASUS CUW User’s Manual

3.HARDWARE SETUP

3.5.2DIMM Installation

Insert the module(s) as shown. Because the number of pins are different on either side of the breaks, the module will only fit in the orientation shown. DIMMs are longer and have different pin contact on each side and therefore have a higher pin density. SIMMs have the same pin contact on both sides.

CUW

CUW 168-Pin DIMM Sockets

Lock

88 Pins

60Pins

20Pins

.3 SETUPH/W

System Memory

The DIMMs must be 3.3V Unbuffered for this motherboard. To determine the DIMM type, check the notches on the DIMMs (see figure below).

168-Pin DIMM Notch Key Definitions (3.3V)

DRAM Key Position Voltage Key Position

RFU	Unbuffered	5.0V	Reserved
Buffered			3.3V

The notches on the DIMM will shift between left, center, or right to identify the type and also to prevent the wrong type from being inserted into the DIMM slot on the motherboard. You must ask your retailer the correct DIMM type before purchasing. This motherboard supports four clock signals per DIMM socket.

ASUS CUW User’s Manual 25