Audience

This installation guide is intended for system integrators, and experienced users with at least basic knowledge of configuring an entry-level server.

Contents

This manual contains the following parts:

1.Introduction: About This Manual

This part introduces the contents of this document. It includes the target audience, chapter description, and conventions used. It also lists other sources of information that are not contained in this manual.

2.Chapter 1: System Overview

This chapter describes the general features of the AP110 server. It includes sections on front panel and rear panel specifications.

3.Chapter 2: Hardware Setup

This chapter lists the hardware setup procedures that you have to perform when installing system components.

4.Chapter 3: Powering Up

This chapter tells how to get started with the AP110 server after you have installed the basic components.

5.Chapter 4: Hardware Options

This chapter gives information on how to install the optional IDE RAID kit. You will also find the procedure for removing and installing the CD-ROM drive in this chapter.

6.Appendix A: Power Supply Information

This appendix gives information on the 250-watt switching power supply that comes with the AP110 server.

7.Appendix B: Troubleshooting

This appendix lists the common problems that you may encounter while using the AP110 server. It lists the possible causes of the problems and offers solutions. You may refer to this part and try to solve simple problems before calling customer support.

10

Introduction: About This Manual