Asus AP110 Connect the Cables, IDE HDD Cabling

2.6 Install a Hard Disk Drive

Connect the Cables

1.Connect one end of the IDE cable to the IDE connector at the back of the drive, matching the red stripe on the cable with Pin 1 on the IDE connector.

2.Connect a power cable (plug marked P3 or P4) to the power connector at the back of the

drive.

IDE Cable

Red Stripe to Pin 1

Power Cable (P3 or P4)

3.Connect the other end of the IDE cable to the primary IDE connector (blue connector) on the motherboard.

Primary IDE Connector

IDE HDD Cabling

The picture on the left shows an installed HDD.

AP110 Server User’s Manual 29