Asus AP110 Re-installthe Cover, Re-installthe Panel

2.7 Replace the Covers

NOTE

If you are installing optional components such as the IDE RAID kit, proceed to Chapter 4 before replacing the covers.

Re-install the Cover

1.Place the cover from the top of the chassis, leaving about an inch from the rear edge.

2.Slide the cover toward the rear panel until it fits in place.

Re-install the Panel

1.Align the bottom edge of the panel to the chassis.

2.Firmly push the panel with both hands until it fits in place.

3.Open the panel door.

4.Secure the panel with the two screws that you removed earlier.

5.Lock the front panel with the system key.

30 Chapter 2: Hardware Setup