4.2 Install Hot-swap HDD

Remove HDD Tray

Cover

The hot-swap drive tray has a cover that you have to remove before you can install a hard disk.

To remove the tray cover:

1.Pull up the lever on the front of the tray. Doing this action slides the tray cover backward about a quarter of an inch.

2.

Following the direction of the

Tray Lever

 

arrow in the picture, use a

 

 

finger to flip out the metal latch

 

 

on the front corner of the cover

 

 

to disengage it from the tray.

 

3.

Slide the cover all the way

 

 

back to remove it.

 

 

 

 

 

 

Metal Latch

AP110 Server User’s Manual

37