4.3 RAID Configuration

Connect Power Cables

Connect the power cables, with plugs labeled P5 and P6, to the power connectors at the back of the hot-swap drive frames.

Power Cables

4.4 Removing a Hot-swap HDD Tray

In the future, you might need to remove the drive tray and replace a hot-swap HDD.

To remove a hot-swap drive tray:

1.Unlock the drive tray you desire to remove.

2.Lift up the tray handle.

3.Pull the tray out of the bay.

4.Refer to section 4.2 for instructions on installing a hot- swap HDD.

40

Chapter 4: Hardware Options