ProblemAction

The system continuously beeps after it was turned on

The message “Non-system disk or disk error” appears

RAID HDD is only detected as 1024MB

RAID HDD shows incorrect size when you execute FDISK

PCI-IDE RAID controller does not detect HDDs

Onboard IDE HDD is unstable

Network connection not available

1.Check the memory modules and make sure you installed the DIMMs the system supports.

2.Make sure that the DIMMs are properly installed on the sockets.

Check if bootable HDD is active.

1.Boot from DOS/Win9x floppy disk.

2.Run FDISK utility to delete all partition

3.Reboot the system and run FDISK /MBR.

If the RAID set is larger than 64GB, try using SPFDISK utility to solve the problem.

Press F6 and load the PCI-IDE RAID driver when booting from Windows NT/200 OS CD.

Install the VIA utility drivers from the ASUS support CD.

1.Make sure the network cable is connector the RJ-45 port on the rear panel.

2.Make sure that you have installed the network drivers from the motherboard support CD.

AP110 Server User’s Manual

49