1-26 Chapter 1: Hardware information
1.7.2 Internal connectors1. Floppy disk drive connector (34-1 pin FLOPPY)
This connector is for the provided floppy disk drive (FDD) signal cable. Insert
one end of the cable to this connector, then connect the other end to the
signal connector at the back of the floppy disk drive.
Pin 5 on the connector is removed to prevent incorrect cable connection when
using an FDD cable with a covered Pin 5.
2. Power LED connector (3-1 pin PLED)
This 3-1 pin connector is for the system power LED. Connect the 3-pin power
LED cable from the system chassis to this connector. The LED lights up when
you turn on the system power, and blinks when the system is in sleep mode.
NOTE: Orient the red markings on
the floppy ribbon cable to PIN 1.
P5SD2-FM Floppy Disk Drive Connector
PIN 1
FLOPPY
P5SD2-FM
r
®
P5SD2-FM
r
®
P5SD2-FM PLED Connector
PLED
1
PLED+
NC
PLED-