7
Safety information
Electrical safety
Operation safety
•Before installing the motherboard and adding devices on it,
carefully read all the manuals that came with the package.
•Before using the product, make sure all cables are correctly
connected and the power cables are not damaged. If you detect
any damage, contact your dealer immediately.
•To avoid short circuits, keep paper clips, screws, and staples
away from connectors, slots, sockets and circuitry.
•Avoid dust, humidity, and temperature extremes. Do not place
the product in any area where it may become wet.
•Place the product on a stable surface.
•If you encounter technical problems with the product, contact a
qualified service technician or your retailer.
Thesymbol of the crossed out wheeled bin indicates that the product (electrical
and electronic equipment) should not be placed in municipal waste. Check local
regulations for disposal of electronic products.
•To prevent electrical shock hazard, disconnect the power cable
from the electrical outlet before relocating the system.
•When adding or removing devices to or from the system,
ensure that the power cables for the devices are unplugged
before the signal cables are connected. If possible, disconnect
all power cables from the existing system before you add a
device.
•Before connecting or removing signal cables from the
motherboard, ensure that all power cables are unplugged.
•Seek professional assistance before using an adapter or
extension cord. These devices could interrupt the grounding
circuit.
•Make sure that your power supply is set to the correct voltage in
your area. If you are not sure about the voltage of the electrical
outlet you are using, contact your local power company.
•If the power supply is broken, do not try to fix it by yourself.
Contact a qualified service technician or your retailer.