Asus P5SD2-FM 2.6.2 Boot Settings Configuration

2-22 Chapter 2: BIOS setup

Bootup Num-Lock [On]

Allows you to select the power-on state for the NumLock.

Configuration options: [Off] [On]

Wait for ‘ F1’If Error [Disabled]

When set to Enabled, the system waits for the F1 key to be pressed when error

occurs. Configuration options: [Disabled] [Enabled]

Hit ‘DEL’Message Display [Enabled]

When set to Enabled, the system displays the message “Press DEL to run Setup

” during POST. Configuration options: [Disabled] [Enabled]

Interrupt 19 Capture [Disabled]

When set to [Enabled], this function allows the option ROMs to trap Interrupt 19.

Configuration options: [Disabled] [Enabled]

2.6.2 Boot Settings Configuration

Boot Settings Configuration

Quick Boot [Enabled]

Full Screen Logo [Enabled]

Bootup Num-Lock [On]

Wait For ‘F ’If Error [Disabled]

Hit ‘DEL ’ Message Display [Enabled]

Interrupt 19 Capture [Disabled]

Allows BIOS to skip

certain tests while

booting. This will

decrease the time

needed to boot the

system.

Set this item to [Enabled] to use the ASUS MyLogo™ feature.

Quick Boot [Enabled]

Enabling this item allows the BIOS to skip some power on self tests (POST) while

booting to decrease the time needed to boot the system. When set to [Disabled],

BIOS performs all the POST items.

Configuration options: [Disabled] [Enabled]

Full Screen Logo [Enabled]

This allows you to enable or disable the full screen logo display feature.

Configuration options: [Disabled] [Enabled]

Contents

Main E2471 First Edition V1 March 2006 Chapter 1: Product introduction Chapter 2: 2.1 BIOS setup Page Notices Canadian Department of Communications Statement Federal Communications Commission Statement Safety information Page P5SD2-FM specifications summary Page Page 1.1 Before you proceed 1.2 Motherboard overview 1.2.1 Placement direction 1.2.2 Screw holes Place six (6) screws into the holes indicated by circles to secure the motherboard to the chassis. 1-4 Chapter 1: Hardware information 1.2.3 Motherboard layout 24.5 cm (9.6 in) IE1394_1 AAFP AUX 1.2.4 Layout Contents 1-6 Chapter 1: Hardware information 1.3.1 Installing the CPU To install a CPU: 1. Locate the CPU socket on the motherboard. 1.3 Central Processing Unit (CPU) Pentium The motherboard comes with a surface mount LGA775 socket designed for the Intel 4 processor in the 775-land package. Page Notes on Intel Hyper-Threading Technology 1.3.2 Installing the CPU heatsink and fan Page 1.3.3 Uninstalling the CPU heatsink and fan Page 1.4.2 Memory Configurations 1.4 System memory 1.4.1 DIMM sockets location 1.4.3 Installing a DIMM 1.4.4 Removing a DIMM 1.5 Expansion slots 1.5.1 Installing an expansion card 1.5.2 Configuring an expansion card ASUS P5SD2-FM 1-17 Standard interrupt assignments 1.5.3 Interrupt assignments 1.5.5PCI slots 1.5.6PCI Express x16 slot 1.5.4 PCI Express x1 1.6 Jumpers Page Page 1.7 Connectors 1.7.1 Rear panel connectors Page 1.7.2 Internal connectors Page Serial ATA Master/Slave connectors P5SD2-FM SATA connectors Page Page Page 1-32 Chapter 1: Hardware information Left Audio Channel Right Audio Channel P5SD2-FM Internal Audio Connector AUX (White) Page Page Page 2.2 BIOS setup program 2.2.2 Menu bar 2.2.1 BIOS menu screen 2.2.3 Navigation keys 2.2.4 Menu items 2.2.5 Sub-menu items 2.2.6 Configuration fields 2.2.7 Pop-up window 2.2.8 Scroll bar 2.3 Main menu 2.3.1 System Time [xx:xx:xx] 2.3.2 System Date [Day xx/xx/xxxx] 2.3.3 Legacy Diskette A [Disabled] 2.3.4 Primary, Secondary, Third, and Fourth IDE Master/Slave Type [Auto] LBA/Large Mode [Auto] Block (Multi-sector Transfer) [Auto] 2.3.5 SATA Mode Selection [4P(IDE)+4S(IDE)] 2.3.6 System Information 2.4 Advanced menu 2.4.1 CPU Configuration Ratio CMOS Setting [14] Max CPUID Value Limit [Disabled] Execute Disable Function [Disabled] Hardware Prefetcher [Enabled] 2.4.2 Chipset CPU Internal Thermal Control [Auto] Auto Detect CPU Frequency [Enabled] NorthBridge SIS649 Chipset Configuration SouthBridge SiS966 Chipset Configuration 2.4.3 Onboard Devices Configuration Serial Port1 Address [3F8/IRQ4] Onboard 1394 Controller [Enabled] 2.4.4 PCI PnP Clear NVRAM [No] Plug and Play O/S [No] Page 2.4.5 USB Configuration Onboard SIS USB1.1 DEVICE [Enabled] Onboard SIS USB2.0 DEVICE [Enabled] Legacy USB Support [Enabled] USB 2.0 Controller Mode [HiSpeed] 2.5 Power menu 2.5.1 ACPI Aware O/S [Yes] 2.5.2 Suspend Mode [S3 only] 2.5.3 Repost Video on S3 Resume [No] 2.5.4 ACPI 2.0 Support [Yes] 2.5.6 APM Configuration Power Button Mode [Off/On] AC Power Loss Restart [Previous State] Power On By PCI Devices [Disabled] Power On By External Modems [Disabled] 2.5.7 Hardware Monitor 2.6.1 Boot Device Priority 1st ~ xxth Boot Device [xxx Drive] 2.6 Boot menu Bootup Num-Lock [On] Wait for F1If Error [Disabled] Hit DELMessage Display [Enabled] Interrupt 19 Capture [Disabled] 2.6.2 Boot Settings Configuration Quick Boot [Enabled] Full Screen Logo [Enabled] 2.6.3 Security Change Supervisor Password User Access Level (Full Access] Change User Password Clear User Password Password Check [Setup] 2.7 Exit menu