Asus P5SD2-FM 2.4.5 USB Configuration

ASUS P5SD2-FM 2-17

The Module Version and USB Devices Enabled items show the

auto-detected values. If no USB device is detected, the item shows None.

2.4.5 USB Configuration

The items in this menu allow you to change the USB-related features. Select an

item then press <Enter> to display the configuration options.

USB Configuration

Module Version - 2.24.0-11.4

USB Devices Enabled: None

OnBoard SIS USB1.1 DEVICE [Enabled]

OnBoard SIS USB2.o DEVICE [Enabled]

Legacy USB Support [Enabled]

USB 2.0 Controller Mode [HiSpeed]

BIOS EHCI Hand-off [Enabled]

Onboard SIS USB1.1 DEVICE [Enabled]

Allows you to enable or disable the OnBoard SIS USB1.1 Device.

Configuration options: [Disabled] [Enabled]

Onboard SIS USB2.0 DEVICE [Enabled]

Allows you to enable or disable the OnBoard SIS USB1.1 Device.

Configuration options: [Disabled] [Enabled]

Legacy USB Support [Enabled]

Allows you to enable or disable support for USB devices on legacy operating

systems (OS). Setting to [Auto] allows the system to detect the presence of USB

devices at startup. If detected, the USB controller legacy mode is enabled. If no

USB device is detected, the legacy USB support is disabled. Configuration options:

[Disabled] [Enabled] [Auto]

USB 2.0 Controller Mode [HiSpeed]

Allows you to set the USB 2.0 controller mode to HiSpeed (480 Mbps) or FullSpeed

(12 Mbps). Configuration options: [FullSpeed] [HiSpeed ]

BIOS EHCI Hand-Off [Enabled]

Allows you to enable or disable the BIOS EHCI Hand-Off..

Configuration options: [Disabled] [Enabled]

Contents

Main E2471 First Edition V1 March 2006 Chapter 1: Product introduction Chapter 2: 2.1 BIOS setup Page Notices Canadian Department of Communications Statement Federal Communications Commission Statement Safety information Page P5SD2-FM specifications summary Page Page 1.1 Before you proceed 1.2 Motherboard overview 1.2.1 Placement direction 1.2.2 Screw holes Place six (6) screws into the holes indicated by circles to secure the motherboard to the chassis. 1-4 Chapter 1: Hardware information 1.2.3 Motherboard layout 24.5 cm (9.6 in) IE1394_1 AAFP AUX 1.2.4 Layout Contents 1-6 Chapter 1: Hardware information 1.3.1 Installing the CPU To install a CPU: 1. Locate the CPU socket on the motherboard. 1.3 Central Processing Unit (CPU) Pentium The motherboard comes with a surface mount LGA775 socket designed for the Intel 4 processor in the 775-land package. Page Notes on Intel Hyper-Threading Technology 1.3.2 Installing the CPU heatsink and fan Page 1.3.3 Uninstalling the CPU heatsink and fan Page 1.4.2 Memory Configurations 1.4 System memory 1.4.1 DIMM sockets location 1.4.3 Installing a DIMM 1.4.4 Removing a DIMM 1.5 Expansion slots 1.5.1 Installing an expansion card 1.5.2 Configuring an expansion card ASUS P5SD2-FM 1-17 Standard interrupt assignments 1.5.3 Interrupt assignments 1.5.5PCI slots 1.5.6PCI Express x16 slot 1.5.4 PCI Express x1 1.6 Jumpers Page Page 1.7 Connectors 1.7.1 Rear panel connectors Page 1.7.2 Internal connectors Page Serial ATA Master/Slave connectors P5SD2-FM SATA connectors Page Page Page 1-32 Chapter 1: Hardware information Left Audio Channel Right Audio Channel P5SD2-FM Internal Audio Connector AUX (White) Page Page Page 2.2 BIOS setup program 2.2.2 Menu bar 2.2.1 BIOS menu screen 2.2.3 Navigation keys 2.2.4 Menu items 2.2.5 Sub-menu items 2.2.6 Configuration fields 2.2.7 Pop-up window 2.2.8 Scroll bar 2.3 Main menu 2.3.1 System Time [xx:xx:xx] 2.3.2 System Date [Day xx/xx/xxxx] 2.3.3 Legacy Diskette A [Disabled] 2.3.4 Primary, Secondary, Third, and Fourth IDE Master/Slave Type [Auto] LBA/Large Mode [Auto] Block (Multi-sector Transfer) [Auto] 2.3.5 SATA Mode Selection [4P(IDE)+4S(IDE)] 2.3.6 System Information 2.4 Advanced menu 2.4.1 CPU Configuration Ratio CMOS Setting [14] Max CPUID Value Limit [Disabled] Execute Disable Function [Disabled] Hardware Prefetcher [Enabled] 2.4.2 Chipset CPU Internal Thermal Control [Auto] Auto Detect CPU Frequency [Enabled] NorthBridge SIS649 Chipset Configuration SouthBridge SiS966 Chipset Configuration 2.4.3 Onboard Devices Configuration Serial Port1 Address [3F8/IRQ4] Onboard 1394 Controller [Enabled] 2.4.4 PCI PnP Clear NVRAM [No] Plug and Play O/S [No] Page 2.4.5 USB Configuration Onboard SIS USB1.1 DEVICE [Enabled] Onboard SIS USB2.0 DEVICE [Enabled] Legacy USB Support [Enabled] USB 2.0 Controller Mode [HiSpeed] 2.5 Power menu 2.5.1 ACPI Aware O/S [Yes] 2.5.2 Suspend Mode [S3 only] 2.5.3 Repost Video on S3 Resume [No] 2.5.4 ACPI 2.0 Support [Yes] 2.5.6 APM Configuration Power Button Mode [Off/On] AC Power Loss Restart [Previous State] Power On By PCI Devices [Disabled] Power On By External Modems [Disabled] 2.5.7 Hardware Monitor 2.6.1 Boot Device Priority 1st ~ xxth Boot Device [xxx Drive] 2.6 Boot menu Bootup Num-Lock [On] Wait for F1If Error [Disabled] Hit DELMessage Display [Enabled] Interrupt 19 Capture [Disabled] 2.6.2 Boot Settings Configuration Quick Boot [Enabled] Full Screen Logo [Enabled] 2.6.3 Security Change Supervisor Password User Access Level (Full Access] Change User Password Clear User Password Password Check [Setup] 2.7 Exit menu