2.5Power menu
The Power menu items allow you to change the settings for the ACPI and Advanced Power Management (APM). Select an item then press <Enter> to display the configuration options.
ACPI Aware O/S | [Yes] | Enable/Disable ACPI |
support for operating | ||
Suspend Mode | [S3 only] | system. |
Repost Video on S3 Resume | [No] |
|
ACPI 2.0 Support | [Yes] | ENABLE: If OS supports |
ACPI APIC Support | [Enabled] | ACPI. |
APM Configuration |
| DISABLE: If OS does |
Hardware Monitor |
| not support ACPI |
2.5.1ACPI Aware O/S [Yes]
Set this item to [Yes] if the operating system supports the Advanced Configuration and Power Interface [ACPI]. Configuration options: [No] [Yes]
2.5.2Suspend Mode [S3 only]
Allows you to select the (ACPI) state to be used for system suspend. Configuration options: [S1 (POS) Only] [S3 Only] [Auto]
2.5.3Repost Video on S3 Resume [No]
Determines whether to invoke VGA BIOS POST on S3/STR resume. Configuration options: [No] [Yes]
2.5.4ACPI 2.0 Support [Yes]
Allows you to add more tables for Advanced Configuration and Power Interface (ACPI) 2.0 specifications. Configuration options: [No] [Yes]
2.5.5ACPI APIC Support [Enabled]
Allows you to enable or disable the Advanced Configuration and Power Interface (ACPI) support in the Advanced Programmable Interrupt Controller (APIC). When set to [Enabled], the ACPI APIC table pointer is included in the RSDT pointer list. Configuration options: [Disabled] [Enabled]
Chapter 2: BIOS setup |
