Safety Information, CE Mark Warning | Asus RTAC66U instruction

Safety Information

To maintain compliance with FCC’s RF exposure guidelines, this equipment should be installed and operated with minimum distance 20cm between the radiator and your body. Use on the supplied antenna.

Declaration of Conformity for R&TTE directive 1999/5/EC

Essential requirements – Article 3

Protection requirements for health and safety – Article 3.1a

Testing for electric safety according to EN 60950-1 has been conducted. These are considered relevant and sufficient.

Protection requirements for electromagnetic compatibility

– Article 3.1b

Testing for electromagnetic compatibility according to EN

301 489-1 and EN 301 489-17 has been conducted. These are considered relevant and sufficient.

Effective use of the radio spectrum – Article 3.2

Testing for radio test suites according to EN 300 328 & EN 301 893 have been conducted. These are considered relevant and sufficient.

Operate the device in 5150-5250 MHz frequency band for indoor use only.

CE Mark Warning

This is a Class B product, in a domestic environment, this product may cause radio interference, in which case the user may be required to take adequate measures.

116

Image 116

Asus RTAC66U manual Safety Information, Declaration of Conformity for R&TTE directive 1999/5/EC, CE Mark Warning

Contents

RT- AC66U Dual Band 3x3 802.11AC Gigabit Router Copyright 2013 ASUSTeK Computer Inc. All Rights Reserved Table of contents Configuring the Advanced Settings Troubleshooting Utilities Package contents Welcome Your wireless router LAN LED Specifications Positioning your router Mounting to the stand To mount to the stand Setup Requirements To set up your wireless router via wired connection Router SetupWired connection Wireless connection To set up your wireless router via wireless connectionPage Logging into the Web GUI To log into the web GUI Log into the Web GUI. The QIS page launches automatically Quick Internet Setup QIS with Auto- detectionTo use QIS with auto-detection For Automatic IP Dhcp For PPPoE For Static IP For Pptp and L2TP Page Connecting to your wireless network To connect to your network Configuring the General settings Using the Network Map Setting up the wireless security settings To set up the wireless security settings 5GHz security settings Key in your security passkey Click Apply when done From the navigation panel, go to General Network Map tab Managing your network clientsTo manage your network clients Monitoring your USB device To monitor your USB devicePage Safely removing the USB disk To safely remove the USB disk Click Enable Creating a Guest NetworkTo create a guest network From the navigation panel, go to General Guest Network To configure additional options, click Modify Click Yes on the Enable Guest Network screenSelect an Authentication Method Select Disable or Enable on the Access Intranet item To set up bandwidth priority Using the Traffic ManagerManaging QoS Quality of Service Bandwidth Page Change the order of upstream network packets that are sent Page Monitoring Traffic Setting up Parental Control To use the parental control function Click OK Click Apply to save the settings To use AiDisk Using the USB ApplicationUsing AiDisk Page Following for the descriptions of the fields Using Servers CenterApplication Servers Center Media Servers tab. Refer to Using Network Place Samba Share service To use Samba share To create a new account Click to add new accountTo delete an existing account To add a folder Using the FTP Share service To use FTP Share service To configure Miscellaneous settings Configure the following settingsMaximum Login User Device Name Character set on FTP Server To set up 3G/4G internet access3 3G/4G Click Apply Using AiCloud To use AiCloud Cloud Disk To create a cloud diskPage Smart Access Click Add new account Smart SyncTo use Smart Sync Wireless GeneralPage Radius with To enable WPS on your wireless network 2 WPSPage Bridge Page Wireless MAC Filter To set up the Wireless MAC filter Radius Setting To set up wireless Radius settings Professional Page Modify the IP address and Subnet Mask LANLAN IP Dhcp Server To configure the Dhcp serverEnable the Dhcp Server item, tick Yes To configure the LAN Routing table Route On the Static Route List, enter the network information On the Enable static routes field, choose YesIptv Internet Connection To configure the WAN connection settingsWAN Page Check with your ISP and fill them in if required To set up Port Trigger Port Trigger Enable Port Trigger Choose YES to enable Port Trigger Virtual Server/Port Forwarding To set up Port ForwardingOn the Enable Port Forwarding item, select Yes Enable Port Forwarding Choose YES to enable Port Forwarding Local IP Key in the client’s LAN IP address Differences between port trigger and port forwarding To remove DMZ To set up DMZ4 DMZ To set up Ddns Ddns NAT Passthrough To set up IPv6 From the navigation panel, go to Advanced Settings IPv6Enter your IPv6 LAN and DNS settings Click Apply IPv6 To set up access to a VPN server VPN Server To set up basic Firewall settings To set up a URL filterFirewall URL Filter To set up a keyword filter Keyword filter Network Services Filter To set up a Network Service filter Administration Operation ModeTo set up the operating mode Select any of these operation modes Time Zone Select the time zone for your network To set up the System settingsSystem Firmware Upgrade Restore/Save/Upload SettingTo upgrade the firmware To restore/save/upload wireless router settings To view your system log System LogSystem Log contains your recorded network activities From your computer’s desktop, click Device DiscoveryTo launch the Device Discovery utility Unplug the wireless router from the power source Firmware Restoration Specify a firmware file, then clickUpload Setting up your printer serverAsus EZ Printer Sharing To set up the EZ Printer sharing mode Page Page Select Add a local printer and then click Next Using LPR to Share PrinterTo share your LPR printer Page Select Custom then click Settings Click Next to finish setting up the standard TCP/IP port Page Download Master To use Download Master To configure BitTorrent download settings Configuring Bit Torrent download settingsUse the navigation panel to configure the advanced settings NZB settings Troubleshooting Basic Troubleshooting Restart your network in the following sequence 103 Frequently Asked Questions FAQs Cannot access the router GUI using a web browser Out of Range Move the router closer to the wireless clientDhcp server has been disabled 106 Internet is not accessible You forgot the Ssid network name or network password How to restore the system to its default settings? Firmware upgrade failed Click OK when done Cannot access Web GUIClick Tools Internet options Connections tab LAN settings Settings Cllick Apply Now when doneWindows Click Start Control Panel Network and Internet Internet Protocol Version 6 TCP/IPv6, then click Properties Click the Apple icon located on the top left of your screen Disable the dial-up connection, if enabled Windows Tick Never dial a connection Asus Recycling/Takeback Services Federal Communications Commission Statement Against harmful interference in a residential installation Prohibition of Co-location CE Mark Warning Safety InformationDeclaration of Conformity for R&TTE directive 1999/5/EC Canada, Industry Canada IC Notices Radio Frequency RF Exposure InformationCanada, avis d’Industry Canada IC Cet appareil numérique de classe B est conforme aux normes Version 2, June NCC 警語GNU General Public License Preamble Terms & conditions for copying, distribution, & modification 121 Page Page Page 125 No Warranty For Turkey only Authorised distributors in TurkeyTel. No Address EEE Yönetmeliğine Uygundur Asus Computer International America Asus Contact informationASUSTeK Computer INC. Asia Pacific Networks Global Hotline Information Area 130 Europe Manufacturer ASUSTeK Computer Inc Tel +886-2-2894-3447Authorised Asus Computer GmbH Representative