Route, To configure the LAN Routing table | Asus RTAC66U manual

NOTES:

•We recommend that you use an IP address format of 192.168.1.xxx (where xxx can be any number between 2 and 254) when specifying an IP address range.

•An IP Pool Starting Address should not be greater than the IP Pool Ending Address.

7.In the DNS and Server Settings section, key in your DNS Server and WINS Server IP address if needed.

8.Your wireless router can also manually assign IP addresses to devices on the network. On the Enable Manual Assignment

field, choose Yes to assign an IP address to specific MAC addresses on the network. Up to 32 MAC Addresses can be added to the DHCP list for manual assignment.

4.2.3 Route

If your network makes use of more than one wireless router, you can configure a routing table to share the same Internet service.

NOTE: We recommend that you do not change the default unless you have advanced knowledge of routing tables.

To configure the LAN Routing table:

1.From the navigation panel, go to Advanced Settings > LAN > Route tab.

65

Image 65

Asus RTAC66U manual Route, To configure the LAN Routing table

Contents

Dual Band 3x3 802.11AC Gigabit Router RT- AC66U Copyright 2013 ASUSTeK Computer Inc. All Rights Reserved Table of contents Configuring the Advanced Settings Utilities Troubleshooting Welcome Package contents LAN LED Your wireless router Specifications Positioning your router To mount to the stand Mounting to the stand Setup Requirements To set up your wireless router via wired connection Router SetupWired connection To set up your wireless router via wireless connection Wireless connectionPage To log into the web GUI Logging into the Web GUI Log into the Web GUI. The QIS page launches automatically Quick Internet Setup QIS with Auto- detectionTo use QIS with auto-detection For Automatic IP Dhcp For PPPoE For Static IP For Pptp and L2TP Page To connect to your network Connecting to your wireless network Using the Network Map Configuring the General settings To set up the wireless security settings Setting up the wireless security settings Key in your security passkey Click Apply when done 5GHz security settings From the navigation panel, go to General Network Map tab Managing your network clientsTo manage your network clients To monitor your USB device Monitoring your USB devicePage To safely remove the USB disk Safely removing the USB disk Creating a Guest Network Click EnableTo create a guest network From the navigation panel, go to General Guest Network Click Yes on the Enable Guest Network screen To configure additional options, click ModifySelect an Authentication Method Select Disable or Enable on the Access Intranet item To set up bandwidth priority Using the Traffic ManagerManaging QoS Quality of Service Bandwidth Page Change the order of upstream network packets that are sent Page Monitoring Traffic To use the parental control function Setting up Parental Control Click OK Click Apply to save the settings To use AiDisk Using the USB ApplicationUsing AiDisk Page Following for the descriptions of the fields Using Servers CenterApplication Servers Center Media Servers tab. Refer to To use Samba share Using Network Place Samba Share service Click to add new account To create a new accountTo delete an existing account To add a folder Using the FTP Share service To use FTP Share service Configure the following settings To configure Miscellaneous settingsMaximum Login User Device Name Character set on FTP Server To set up 3G/4G internet access3 3G/4G Click Apply To use AiCloud Using AiCloud To create a cloud disk Cloud DiskPage Smart Access Click Add new account Smart SyncTo use Smart Sync General WirelessPage Radius with 2 WPS To enable WPS on your wireless networkPage Bridge Page To set up the Wireless MAC filter Wireless MAC Filter To set up wireless Radius settings Radius Setting Professional Page Modify the IP address and Subnet Mask LANLAN IP Dhcp Server To configure the Dhcp serverEnable the Dhcp Server item, tick Yes Route To configure the LAN Routing table On the Static Route List, enter the network information On the Enable static routes field, choose YesIptv Internet Connection To configure the WAN connection settingsWAN Page Check with your ISP and fill them in if required Port Trigger To set up Port Trigger Enable Port Trigger Choose YES to enable Port Trigger Virtual Server/Port Forwarding To set up Port ForwardingOn the Enable Port Forwarding item, select Yes Enable Port Forwarding Choose YES to enable Port Forwarding Differences between port trigger and port forwarding Local IP Key in the client’s LAN IP address To remove DMZ To set up DMZ4 DMZ Ddns To set up Ddns NAT Passthrough From the navigation panel, go to Advanced Settings IPv6 To set up IPv6Enter your IPv6 LAN and DNS settings Click Apply IPv6 VPN Server To set up access to a VPN server To set up a URL filter To set up basic Firewall settingsFirewall URL Filter Keyword filter To set up a keyword filter To set up a Network Service filter Network Services Filter Operation Mode AdministrationTo set up the operating mode Select any of these operation modes Time Zone Select the time zone for your network To set up the System settingsSystem Restore/Save/Upload Setting Firmware UpgradeTo upgrade the firmware To restore/save/upload wireless router settings To view your system log System LogSystem Log contains your recorded network activities From your computer’s desktop, click Device DiscoveryTo launch the Device Discovery utility Firmware Restoration Unplug the wireless router from the power source Specify a firmware file, then clickUpload Setting up your printer serverAsus EZ Printer Sharing To set up the EZ Printer sharing mode Page Page Select Add a local printer and then click Next Using LPR to Share PrinterTo share your LPR printer Page Select Custom then click Settings Click Next to finish setting up the standard TCP/IP port Page To use Download Master Download Master To configure BitTorrent download settings Configuring Bit Torrent download settingsUse the navigation panel to configure the advanced settings NZB settings Basic Troubleshooting Troubleshooting Restart your network in the following sequence 103 Cannot access the router GUI using a web browser Frequently Asked Questions FAQs Out of Range Move the router closer to the wireless clientDhcp server has been disabled 106 Internet is not accessible How to restore the system to its default settings? You forgot the Ssid network name or network password Firmware upgrade failed Click OK when done Cannot access Web GUIClick Tools Internet options Connections tab LAN settings Cllick Apply Now when done SettingsWindows Click Start Control Panel Network and Internet Internet Protocol Version 6 TCP/IPv6, then click Properties Click the Apple icon located on the top left of your screen Tick Never dial a connection Disable the dial-up connection, if enabled Windows Federal Communications Commission Statement Asus Recycling/Takeback Services Prohibition of Co-location Against harmful interference in a residential installation CE Mark Warning Safety InformationDeclaration of Conformity for R&TTE directive 1999/5/EC Radio Frequency RF Exposure Information Canada, Industry Canada IC NoticesCanada, avis d’Industry Canada IC Cet appareil numérique de classe B est conforme aux normes Version 2, June NCC 警語GNU General Public License Preamble Terms & conditions for copying, distribution, & modification 121 Page Page Page 125 No Warranty Authorised distributors in Turkey For Turkey onlyTel. No Address EEE Yönetmeliğine Uygundur Asus Computer International America Asus Contact informationASUSTeK Computer INC. Asia Pacific Area Networks Global Hotline Information 130 Europe Manufacturer ASUSTeK Computer Inc Tel +886-2-2894-3447Authorised Asus Computer GmbH Representative