Click Apply | Asus RTAC66U instruction

•Location: Select your 3G/4G service provider’s location from the dropdown list.

•ISP: Select your Internet Service Provider (ISP) from the dropdown list.

•APN (Access Point Name) service (optional): Contact your 3G/4G service provider for detailed information.

•Dial Number and PIN code: The 3G/4G provider’s access number and PIN code for connection.

NOTE: PIN code may vary from different providers.

•Username / Password: The username and password will be provided by the 3G/4G network carrier.

•USB Adapter: Choose your USB 3G / 4G adapter from the dropdown list. If you are not sure of your USB adapter’s model or the model is not listed in the options, select Auto.

4.Click Apply.

NOTE: The router will reboot for settings to take effect.

46

Image 46

Asus RTAC66U manual Click Apply

Contents

RT- AC66U Dual Band 3x3 802.11AC Gigabit Router Copyright 2013 ASUSTeK Computer Inc. All Rights Reserved Table of contents Configuring the Advanced Settings Troubleshooting Utilities Package contents Welcome Your wireless router LAN LED Specifications Positioning your router Mounting to the stand To mount to the stand Setup Requirements Wired connection Router SetupTo set up your wireless router via wired connection Wireless connection To set up your wireless router via wireless connectionPage Logging into the Web GUI To log into the web GUI To use QIS with auto-detection Quick Internet Setup QIS with Auto- detectionLog into the Web GUI. The QIS page launches automatically For Automatic IP Dhcp For PPPoE For Static IP For Pptp and L2TP Page Connecting to your wireless network To connect to your network Configuring the General settings Using the Network Map Setting up the wireless security settings To set up the wireless security settings 5GHz security settings Key in your security passkey Click Apply when done To manage your network clients Managing your network clientsFrom the navigation panel, go to General Network Map tab Monitoring your USB device To monitor your USB devicePage Safely removing the USB disk To safely remove the USB disk To create a guest network Click EnableCreating a Guest Network From the navigation panel, go to General Guest Network Select an Authentication Method To configure additional options, click ModifyClick Yes on the Enable Guest Network screen Select Disable or Enable on the Access Intranet item Managing QoS Quality of Service Bandwidth Using the Traffic ManagerTo set up bandwidth priority Page Change the order of upstream network packets that are sent Page Monitoring Traffic Setting up Parental Control To use the parental control function Click OK Click Apply to save the settings Using AiDisk Using the USB ApplicationTo use AiDisk Page Application Servers Center Media Servers tab. Refer to Using Servers CenterFollowing for the descriptions of the fields Using Network Place Samba Share service To use Samba share To delete an existing account To create a new accountClick to add new account To add a folder Using the FTP Share service To use FTP Share service Maximum Login User To configure Miscellaneous settingsConfigure the following settings Device Name 3 3G/4G To set up 3G/4G internet accessCharacter set on FTP Server Click Apply Using AiCloud To use AiCloud Cloud Disk To create a cloud diskPage Smart Access To use Smart Sync Smart SyncClick Add new account Wireless GeneralPage Radius with To enable WPS on your wireless network 2 WPSPage Bridge Page Wireless MAC Filter To set up the Wireless MAC filter Radius Setting To set up wireless Radius settings Professional Page LAN IP LANModify the IP address and Subnet Mask Enable the Dhcp Server item, tick Yes To configure the Dhcp serverDhcp Server To configure the LAN Routing table Route Iptv On the Enable static routes field, choose YesOn the Static Route List, enter the network information WAN To configure the WAN connection settingsInternet Connection Page Check with your ISP and fill them in if required To set up Port Trigger Port Trigger Enable Port Trigger Choose YES to enable Port Trigger On the Enable Port Forwarding item, select Yes To set up Port ForwardingVirtual Server/Port Forwarding Enable Port Forwarding Choose YES to enable Port Forwarding Local IP Key in the client’s LAN IP address Differences between port trigger and port forwarding 4 DMZ To set up DMZTo remove DMZ To set up Ddns Ddns NAT Passthrough Enter your IPv6 LAN and DNS settings Click Apply To set up IPv6From the navigation panel, go to Advanced Settings IPv6 IPv6 To set up access to a VPN server VPN Server Firewall To set up basic Firewall settingsTo set up a URL filter URL Filter To set up a keyword filter Keyword filter Network Services Filter To set up a Network Service filter To set up the operating mode AdministrationOperation Mode Select any of these operation modes System To set up the System settingsTime Zone Select the time zone for your network To upgrade the firmware Firmware UpgradeRestore/Save/Upload Setting To restore/save/upload wireless router settings System Log contains your recorded network activities System LogTo view your system log To launch the Device Discovery utility Device DiscoveryFrom your computer’s desktop, click Unplug the wireless router from the power source Firmware Restoration Asus EZ Printer Sharing Setting up your printer serverSpecify a firmware file, then clickUpload To set up the EZ Printer sharing mode Page Page To share your LPR printer Using LPR to Share PrinterSelect Add a local printer and then click Next Page Select Custom then click Settings Click Next to finish setting up the standard TCP/IP port Page Download Master To use Download Master Use the navigation panel to configure the advanced settings Configuring Bit Torrent download settingsTo configure BitTorrent download settings NZB settings Troubleshooting Basic Troubleshooting Restart your network in the following sequence 103 Frequently Asked Questions FAQs Cannot access the router GUI using a web browser Dhcp server has been disabled Move the router closer to the wireless clientOut of Range 106 Internet is not accessible You forgot the Ssid network name or network password How to restore the system to its default settings? Firmware upgrade failed Click Tools Internet options Connections tab LAN settings Cannot access Web GUIClick OK when done Windows Click Start Control Panel Network and Internet SettingsCllick Apply Now when done Internet Protocol Version 6 TCP/IPv6, then click Properties Click the Apple icon located on the top left of your screen Disable the dial-up connection, if enabled Windows Tick Never dial a connection Asus Recycling/Takeback Services Federal Communications Commission Statement Against harmful interference in a residential installation Prohibition of Co-location Declaration of Conformity for R&TTE directive 1999/5/EC Safety InformationCE Mark Warning Canada, avis d’Industry Canada IC Canada, Industry Canada IC NoticesRadio Frequency RF Exposure Information Cet appareil numérique de classe B est conforme aux normes GNU General Public License NCC 警語Version 2, June Preamble Terms & conditions for copying, distribution, & modification 121 Page Page Page 125 No Warranty Tel. No Address For Turkey onlyAuthorised distributors in Turkey EEE Yönetmeliğine Uygundur ASUSTeK Computer INC. Asia Pacific Asus Contact informationAsus Computer International America Networks Global Hotline Information Area 130 Authorised Asus Computer GmbH Representative Manufacturer ASUSTeK Computer Inc Tel +886-2-2894-3447Europe