2 WPS, To enable WPS on your wireless network | Asus RTAC66U

4.1.2 WPS

WPS (Wi-Fi Protected Setup) is a wireless security standard that allows you to easily connect devices to a wireless network. You can configure the WPS function via the PIN code or WPS button.

NOTE: Ensure that the devices support WPS.

To enable WPS on your wireless network:

1.From the navigation panel, go to Advanced Settings > Wireless > WPS tab.

2.. In the Enable WPS field, move the slider to ON.

3.WPS uses 2.4GHz by default. If you want to change the frequency to 5GHz, turn OFF the WPS function, click Switch Frequency in the Current Frequency field, and turn WPS ON again.

55

Image 55

Asus RTAC66U manual 2 WPS, To enable WPS on your wireless network

Contents

Dual Band 3x3 802.11AC Gigabit Router RT- AC66U Copyright 2013 ASUSTeK Computer Inc. All Rights Reserved Table of contents Configuring the Advanced Settings Utilities Troubleshooting Welcome Package contents LAN LED Your wireless router Specifications Positioning your router To mount to the stand Mounting to the stand Setup Requirements Wired connection Router SetupTo set up your wireless router via wired connection To set up your wireless router via wireless connection Wireless connectionPage To log into the web GUI Logging into the Web GUI To use QIS with auto-detection Quick Internet Setup QIS with Auto- detectionLog into the Web GUI. The QIS page launches automatically For Automatic IP Dhcp For PPPoE For Static IP For Pptp and L2TP Page To connect to your network Connecting to your wireless network Using the Network Map Configuring the General settings To set up the wireless security settings Setting up the wireless security settings Key in your security passkey Click Apply when done 5GHz security settings To manage your network clients Managing your network clientsFrom the navigation panel, go to General Network Map tab To monitor your USB device Monitoring your USB devicePage To safely remove the USB disk Safely removing the USB disk From the navigation panel, go to General Guest Network Click EnableCreating a Guest Network To create a guest network Select Disable or Enable on the Access Intranet item To configure additional options, click ModifyClick Yes on the Enable Guest Network screen Select an Authentication Method Managing QoS Quality of Service Bandwidth Using the Traffic ManagerTo set up bandwidth priority Page Change the order of upstream network packets that are sent Page Monitoring Traffic To use the parental control function Setting up Parental Control Click OK Click Apply to save the settings Using AiDisk Using the USB ApplicationTo use AiDisk Page Application Servers Center Media Servers tab. Refer to Using Servers CenterFollowing for the descriptions of the fields To use Samba share Using Network Place Samba Share service To add a folder To create a new accountClick to add new account To delete an existing account Using the FTP Share service To use FTP Share service Device Name To configure Miscellaneous settingsConfigure the following settings Maximum Login User 3 3G/4G To set up 3G/4G internet accessCharacter set on FTP Server Click Apply To use AiCloud Using AiCloud To create a cloud disk Cloud DiskPage Smart Access To use Smart Sync Smart SyncClick Add new account General WirelessPage Radius with 2 WPS To enable WPS on your wireless networkPage Bridge Page To set up the Wireless MAC filter Wireless MAC Filter To set up wireless Radius settings Radius Setting Professional Page LAN IP LANModify the IP address and Subnet Mask Enable the Dhcp Server item, tick Yes To configure the Dhcp serverDhcp Server Route To configure the LAN Routing table Iptv On the Enable static routes field, choose YesOn the Static Route List, enter the network information WAN To configure the WAN connection settingsInternet Connection Page Check with your ISP and fill them in if required Port Trigger To set up Port Trigger Enable Port Trigger Choose YES to enable Port Trigger On the Enable Port Forwarding item, select Yes To set up Port ForwardingVirtual Server/Port Forwarding Enable Port Forwarding Choose YES to enable Port Forwarding Differences between port trigger and port forwarding Local IP Key in the client’s LAN IP address 4 DMZ To set up DMZTo remove DMZ Ddns To set up Ddns NAT Passthrough IPv6 To set up IPv6From the navigation panel, go to Advanced Settings IPv6 Enter your IPv6 LAN and DNS settings Click Apply VPN Server To set up access to a VPN server URL Filter To set up basic Firewall settingsTo set up a URL filter Firewall Keyword filter To set up a keyword filter To set up a Network Service filter Network Services Filter Select any of these operation modes AdministrationOperation Mode To set up the operating mode System To set up the System settingsTime Zone Select the time zone for your network To restore/save/upload wireless router settings Firmware UpgradeRestore/Save/Upload Setting To upgrade the firmware System Log contains your recorded network activities System LogTo view your system log To launch the Device Discovery utility Device DiscoveryFrom your computer’s desktop, click Firmware Restoration Unplug the wireless router from the power source Asus EZ Printer Sharing Setting up your printer serverSpecify a firmware file, then clickUpload To set up the EZ Printer sharing mode Page Page To share your LPR printer Using LPR to Share PrinterSelect Add a local printer and then click Next Page Select Custom then click Settings Click Next to finish setting up the standard TCP/IP port Page To use Download Master Download Master Use the navigation panel to configure the advanced settings Configuring Bit Torrent download settingsTo configure BitTorrent download settings NZB settings Basic Troubleshooting Troubleshooting Restart your network in the following sequence 103 Cannot access the router GUI using a web browser Frequently Asked Questions FAQs Dhcp server has been disabled Move the router closer to the wireless clientOut of Range 106 Internet is not accessible How to restore the system to its default settings? You forgot the Ssid network name or network password Firmware upgrade failed Click Tools Internet options Connections tab LAN settings Cannot access Web GUIClick OK when done Internet Protocol Version 6 TCP/IPv6, then click Properties SettingsCllick Apply Now when done Windows Click Start Control Panel Network and Internet Click the Apple icon located on the top left of your screen Tick Never dial a connection Disable the dial-up connection, if enabled Windows Federal Communications Commission Statement Asus Recycling/Takeback Services Prohibition of Co-location Against harmful interference in a residential installation Declaration of Conformity for R&TTE directive 1999/5/EC Safety InformationCE Mark Warning Cet appareil numérique de classe B est conforme aux normes Canada, Industry Canada IC NoticesRadio Frequency RF Exposure Information Canada, avis d’Industry Canada IC GNU General Public License NCC 警語Version 2, June Preamble Terms & conditions for copying, distribution, & modification 121 Page Page Page 125 No Warranty EEE Yönetmeliğine Uygundur For Turkey onlyAuthorised distributors in Turkey Tel. No Address ASUSTeK Computer INC. Asia Pacific Asus Contact informationAsus Computer International America Area Networks Global Hotline Information 130 Authorised Asus Computer GmbH Representative Manufacturer ASUSTeK Computer Inc Tel +886-2-2894-3447Europe