Using Servers Center | Asus RTAC66U guide

3.5.2 Using Servers Center

The Servers Center allows you to share the media files from the USB disk via a Media Server directory, Samba share service, or FTP share service. You can also configure other settings for the USB disk in the Servers Center.

Using Media Server

Your wireless router allows DLNA-supported devices to access multimedia files from the USB disk connected to your wireless router.

NOTE: Before using the DLNA Media Server function, connect your device to the RT-AC66U’s network.

To launch the Media Server setting page, go to General > USB

application > Servers Center > Media Servers tab. Refer to the

following for the descriptions of the fields:

•Enable DLNA Media Server: Select ON/OFF to enable/ disable the DLNA Media Server.

39

Image 39

Asus RTAC66U manual Using Servers Center, Application Servers Center Media Servers tab. Refer to

Contents

Dual Band 3x3 802.11AC Gigabit Router RT- AC66U Copyright 2013 ASUSTeK Computer Inc. All Rights Reserved Table of contents Configuring the Advanced Settings Utilities Troubleshooting Welcome Package contents LAN LED Your wireless router Specifications Positioning your router To mount to the stand Mounting to the stand Setup Requirements Router Setup Wired connectionTo set up your wireless router via wired connection To set up your wireless router via wireless connection Wireless connectionPage To log into the web GUI Logging into the Web GUI Quick Internet Setup QIS with Auto- detection To use QIS with auto-detectionLog into the Web GUI. The QIS page launches automatically For Automatic IP Dhcp For PPPoE For Static IP For Pptp and L2TP Page To connect to your network Connecting to your wireless network Using the Network Map Configuring the General settings To set up the wireless security settings Setting up the wireless security settings Key in your security passkey Click Apply when done 5GHz security settings Managing your network clients To manage your network clientsFrom the navigation panel, go to General Network Map tab To monitor your USB device Monitoring your USB devicePage To safely remove the USB disk Safely removing the USB disk From the navigation panel, go to General Guest Network Click EnableCreating a Guest Network To create a guest network Select Disable or Enable on the Access Intranet item To configure additional options, click ModifyClick Yes on the Enable Guest Network screen Select an Authentication Method Using the Traffic Manager Managing QoS Quality of Service BandwidthTo set up bandwidth priority Page Change the order of upstream network packets that are sent Page Monitoring Traffic To use the parental control function Setting up Parental Control Click OK Click Apply to save the settings Using the USB Application Using AiDiskTo use AiDisk Page Using Servers Center Application Servers Center Media Servers tab. Refer toFollowing for the descriptions of the fields To use Samba share Using Network Place Samba Share service To add a folder To create a new accountClick to add new account To delete an existing account Using the FTP Share service To use FTP Share service Device Name To configure Miscellaneous settingsConfigure the following settings Maximum Login User To set up 3G/4G internet access 3 3G/4GCharacter set on FTP Server Click Apply To use AiCloud Using AiCloud To create a cloud disk Cloud DiskPage Smart Access Smart Sync To use Smart SyncClick Add new account General WirelessPage Radius with 2 WPS To enable WPS on your wireless networkPage Bridge Page To set up the Wireless MAC filter Wireless MAC Filter To set up wireless Radius settings Radius Setting Professional Page LAN LAN IPModify the IP address and Subnet Mask To configure the Dhcp server Enable the Dhcp Server item, tick YesDhcp Server Route To configure the LAN Routing table On the Enable static routes field, choose Yes IptvOn the Static Route List, enter the network information To configure the WAN connection settings WANInternet Connection Page Check with your ISP and fill them in if required Port Trigger To set up Port Trigger Enable Port Trigger Choose YES to enable Port Trigger To set up Port Forwarding On the Enable Port Forwarding item, select YesVirtual Server/Port Forwarding Enable Port Forwarding Choose YES to enable Port Forwarding Differences between port trigger and port forwarding Local IP Key in the client’s LAN IP address To set up DMZ 4 DMZTo remove DMZ Ddns To set up Ddns NAT Passthrough IPv6 To set up IPv6From the navigation panel, go to Advanced Settings IPv6 Enter your IPv6 LAN and DNS settings Click Apply VPN Server To set up access to a VPN server URL Filter To set up basic Firewall settingsTo set up a URL filter Firewall Keyword filter To set up a keyword filter To set up a Network Service filter Network Services Filter Select any of these operation modes AdministrationOperation Mode To set up the operating mode To set up the System settings SystemTime Zone Select the time zone for your network To restore/save/upload wireless router settings Firmware UpgradeRestore/Save/Upload Setting To upgrade the firmware System Log System Log contains your recorded network activitiesTo view your system log Device Discovery To launch the Device Discovery utilityFrom your computer’s desktop, click Firmware Restoration Unplug the wireless router from the power source Setting up your printer server Asus EZ Printer SharingSpecify a firmware file, then clickUpload To set up the EZ Printer sharing mode Page Page Using LPR to Share Printer To share your LPR printerSelect Add a local printer and then click Next Page Select Custom then click Settings Click Next to finish setting up the standard TCP/IP port Page To use Download Master Download Master Configuring Bit Torrent download settings Use the navigation panel to configure the advanced settingsTo configure BitTorrent download settings NZB settings Basic Troubleshooting Troubleshooting Restart your network in the following sequence 103 Cannot access the router GUI using a web browser Frequently Asked Questions FAQs Move the router closer to the wireless client Dhcp server has been disabledOut of Range 106 Internet is not accessible How to restore the system to its default settings? You forgot the Ssid network name or network password Firmware upgrade failed Cannot access Web GUI Click Tools Internet options Connections tab LAN settingsClick OK when done Internet Protocol Version 6 TCP/IPv6, then click Properties SettingsCllick Apply Now when done Windows Click Start Control Panel Network and Internet Click the Apple icon located on the top left of your screen Tick Never dial a connection Disable the dial-up connection, if enabled Windows Federal Communications Commission Statement Asus Recycling/Takeback Services Prohibition of Co-location Against harmful interference in a residential installation Safety Information Declaration of Conformity for R&TTE directive 1999/5/ECCE Mark Warning Cet appareil numérique de classe B est conforme aux normes Canada, Industry Canada IC NoticesRadio Frequency RF Exposure Information Canada, avis d’Industry Canada IC NCC 警語 GNU General Public LicenseVersion 2, June Preamble Terms & conditions for copying, distribution, & modification 121 Page Page Page 125 No Warranty EEE Yönetmeliğine Uygundur For Turkey onlyAuthorised distributors in Turkey Tel. No Address Asus Contact information ASUSTeK Computer INC. Asia PacificAsus Computer International America Area Networks Global Hotline Information 130 Manufacturer ASUSTeK Computer Inc Tel +886-2-2894-3447 Authorised Asus Computer GmbH RepresentativeEurope