RX3141 User’s Manual

Chapter 2 Getting to Know

2.5Placement Options

Depending on your environment, you may choose one of the three supported placement options for RX3141 – desktop placement, magnet mount and wall mount.

2.5.1Desktop Placement

You may place RX3141 on any flat surface. The space-saving design of RX3141 occupies only a small area on your desk.

2.5.2Magnet Mount Instructions

Place RX3141 onto any metal surface that attracts magnet, such as most desktop computer housings, cabinets and etc.

2.5.3Wall Mount Instructions:

1.Attach two screws on the wall, separated by 115mm if you want the front or rear panel facing upward, 76mm if you want left or right side facing upward. Make sure that the two screws are leveled. Note that there are four wall mount slots and you may choose any adjacent slots for wall mounting.

115mm or 76mm

2.Line up the wall mount slots with the screws and maneuver RX3141 so that both screws are inserted into the wall mount slots as indicated in the following figures.

Screws

Wall mount slots

Screws

Wall mount slots

Maneuver the switch so that both screws are inserted into the wall mount slots.

Line up the wall mount slots w/ both screws.

9