Chapter 5 Router Connection Setup

RX3141 User’s Manual

5.2.5Static IP

Connection Mode drop- down list

Figure 5.13. WAN – Static IP Configuration

5.2.5.1WAN Static IP Configuration Parameters

Table 5.4 describes the configuration parameters available for static IP connection mode.

 

Table 5.4. WAN Static IP Configuration Parameters

 

 

Setting

Description

Connection Mode

Select Static from the connection mode drop-down list.

 

 

IP Address

WAN IP address provided by your ISP.

 

 

Subnet Mask

WAN subnet mask provided by your ISP. Typically, it is set as 255.255.255.0.

 

 

Gateway Address

Gateway IP address provided by your ISP. It must be in the same subnet as

 

the WAN on the RX3141.

 

 

Primary/Secondary

You must at least enter the IP address of the primary DNS server. Secondary

DNS Server

DNS server is optional

 

 

5.2.5.2Configuring Static IP for WAN

Follow the instructions below to configure static IP settings:

1.Open the Router Connection configuration page by double clicking the Router Setup Î Connection menu.

2.Select Static from the Connection Mode drop-down list as shown in Figure 5.13.

3.Enter WAN IP address in the IP Address field. This information should be provided by your ISP.

4.Enter Subnet Mask for the WAN. This information should be provided by your ISP. Typically, it is 255.255.255.0.

5.Enter gateway address provided by your ISP in the space provided.

6.Enter the IP address of the primary DNS server. This information should be provided by your ISP. Secondary DNS server is optional.

7.Click to save the settings

.

34