RX3141 User’s Manual | Chapter 11. System Management |
Following describes the procedure to setup a special application for Quick Time.
1.Open the Special Application configuration page, as shown in Figure 10.5, by double clicking the Advanced Î Special Application menu.
2.Select Quick Time from the Enable
3.Click 
to save the settings.
4.The RX3141 has a default outbound ACL rule to forward all the outbound traffic to the external networks. This default outbound ACL rule allows any one to use application defined in the Special Application configuration page. If this is what you want, skip this step. However, for security concerns or any other reasons, you may want to restrict the use of these applications to a particular group of users. Then configure an outbound ACL rule to control outbound access as illustrated in Figure 10.6. This example restricts the access to hosts in the IP address range from 192.168.1.110 to 192.168.1.115. Note that you must remove the default firewall outbound ACL rule for the access restriction to work because the default outbound ACL rule allows any one to use any applications setup in the Special Application configuration page. To delete the default outbound ACL rule, just click the 
icon in front of the default ACL rule in the Outbound ACL Rule table located in the Outbound ACL Rule configuration page (as shown in Figure 10.7). For details on configuring an outbound ACL rule, please refer to the section 9.5 Configuring Outbound ACL Rules.
69