RX3141 User’s Manual

Chapter 9. Configuring Firewall/NAT Settings

2.Click on the icon of the rule to be modified in the outbound ACL table or select the rule number from the “ID” drop-down list.

3.Make desired changes to any or all of the following fields: action, source/destination IP, source/destination port, protocol, ICMP message type and log. Please see Table 9.3 for explanation of these fields.

4.Click on the button to modify this ACL rule. The new settings for this ACL rule will then be displayed in the outbound access control list table at the bottom half of the Outbound ACL Configuration page.

9.5.3Delete Outbound ACL Rules

To delete an outbound ACL rule, just open the Outbound ACL Rule configuration page by double clicking the Router Setup Î Outbound ACL menu and then click on the in front of the rule to be deleted:

9.5.4Display Outbound ACL Rules

Open the Outbound ACL Rule configuration page by double clicking the Router Setup ÎOutbound ACL menu.

9.6Configuring Self-Access ACL Rules – (Router Setup Î Self-Access ACL)

Self-Access rules control access to/from the RX3141 itself. You may use Self-Access Rule Configuration page, as illustrated in Figure 9.8, to:

fAdd a Self-Access rule

fModify an existing Self-Access rule

fDelete an existing Self-Access rule

fView existing Self-Access rules

59