Asus RX3141 RX3141i, Internet, This LED:, Wireless AP, ...should be:, Ethernet cable, Cable or ADSL Modem, Table 3.1. LED Indicators, 3.1.3Step 3. Attach the AC adapter

Chapter 3. Quick Start Guide RX3141 User’s Manual

3.1.3Step 3. Attach the AC adapter.

Attach the AC adapter to the POWER input jack on the back of the device and plug in the adapter to a wall outlet or a power strip.

3.1.4Step 4. Power on RX3141, the ADSL or cable modem and power up your computers.

Plug the AC adapter to the power input jack of RX3141. Turn on your ADSL or cable modem. Turn on and boot up your computer(s) and/or any LAN devices such as wireless AP, hubs or switches.

InternetCable or ADSL ModemRX3141iEthernet cableWireless APFigure 3.1. Overview of Hardware Connections

You should verify that the LEDs are illuminated as indicated in Table 3.1.

	Table 3.1. LED Indicators
This LED:	...should be:
POWER	Solid green to indicate that the device is turned on. If this light
	is not on, check if the AC adapter is attached to the RX3141
	and if it is plugged into a power source.
1 – 4	Solid green to indicate that the device can communicate with
STATUS	your LAN or flashing when the device is sending or receiving
LED	data to/from your LAN computer(s).
WAN	Solid green to indicate that the device has successfully
	established a connection with your ISP or flashing when the
	device is sending or receiving data to/from the Internet.

If the LEDs illuminate as expected, the RX3141 is working properly.

12