2.9 Installing a hard disk drive

The system supports one UltraATA133 IDE/Serial ATA hard disk drive (HDD).

To install a hard disk drive:

1.Locate the HDD metal tray

flathead lock screw on the other side of the chassis.

2. Remove the flat head screw

 

using a Philips screw driver.

1

Keep the screw for later use.

 

2

3.Slide the HDD metal tray

outward until its slots are

 

released from the tray locks.

Tray locks

 

 

3

Lock slots

Tray locks

4. Place a hard disk drive on the

 

HDD metal tray with its bottom

5

on the open side of the tray.

4

Align the HDD and HDD metal

 

tray screw holes.

 

5. Secure the HDD with four screws.

5

Configure your hard disk drive as Master device before connecting the IDE cable and power plug. Refer to the HDD documentation on how to set the drive as a Master device.

ASUS Terminator 2 barebone system

37