1.6LED panel

The LED panel displays various system information depending on the system mode.

The LED panel displays the system time in 24-hour format when the system is in soft-off or stand-by mode, S3 (Suspend-to-RAM), or S4 (Suspend-to-Disk) state. Enter the BIOS setup or the operating system to adjust the time.

Audio DJ mode

The LED panel displays various information when the system is in Audio DJ mode.

In CD mode, the LED panel displays the

CD mode, play/paused status

play/pause icon, number, and duration of

 

 

the audio CD track being played.

 

 

 

 

In Radio mode, the LED panel displays

FM radio mode

the station preset number and station

 

 

frequency. Refer to the section below on

 

 

 

 

how to preset a radio station.

 

 

Refer to page 46 on how to turn on the Audio DJ feature.

Presetting a radio station

To preset a radio station:

1.Put the Audio DJ in Radio mode.

2.Use the PLAY/PAUSE button for less than 2 seconds to scan the radio frequency, then select the station you wish to preset.

4.Press the PLAY/PAUSE button for more than 2 seconds until the station frequency display in the LED panel blinks.

5.Use the NEXT or PREVIOUS button to select a preset number (1 ~ 9) for the selected station.

6.Press the PLAY/PAUSE button to confirm the preset station.

22

Chapter 1: System introduction