2.10 Re-installing the power supply unit

After installing the system components and reconnecting the cables, reinstall the power supply unit (PSU).

To reinstall the PSU:

1.Connect the 4-pin 12V power plug to the ATX12V connector on the motherboard labeled ATX12V. See page 81 for the location of the ATX12V connector.

2.Position the PSU over the chassis.

4

3

3. Align the PSU side hook with the

metal slot located in the side of the optical drive bay.

2

4. Slide the PSU toward the direction of the rear panel until it fits in place.

4

5.Secure the PSU with the screw you removed earlier.

Make sure the PSU cables do not interfere with CPU and chassis fans.

5

ASUS Terminator 2 barebone system

39