6.Re-install the HDD metal tray and HDD in the chassis by

sliding it into the tray hooks.

7. Secure the HDD metal tray with

the flat head screw you earlier

6

removed. 7

8.Connect one end of the 40-pin

IDE cable to the IDE connector on the drive.

9. Connect a 4-pin power plug from the power supply unit to the HDD power connector.

10. Connect the other end of the IDE ribbon cable to the primary IDE connector (blue connector labeled PRI_IDE) on the motherboard. See page 77 for the location of the primary IDE connector.

8

9

38

Chapter 2: Basic installation