7.Connect a power cable from the power supply unit to the

power connector at the back of

 

7

the optical drive. See page 40

 

for details.

 

 

8. Connect one end of the IDE

9

8

 

 

ribbon cable to the IDE interface at the back of the

optical drive, matching the red stripe on the cable with Pin 1 on the IDE interface.

9.Connect one end of the optical drive audio cable to the 4-pin connector at the back of the optical drive.

10.Connect the other end of the IDE ribbon cable to the secondary IDE connector (black connector labeled SEC_IDE) on the motherboard. See page 49 for the location of the secondary IDE connector.

11.Connect the other end of the audio cable to the black 4-pin connector labeled CD1 on the motherboard. See page 80 for the location of the CD connector.

12.Re-install the front panel cover

by aligning its hooks with the holes on the chassis.

On Deluxe models, re-connect

the LED panel and the front

12 audio button panel cables to

their respective connectors before re-installing the front

panel cover.

13. Snap the front panel cover hooks to the chassis holes as indicated.

13

36

Chapter 2: Basic installation