7 8

Power supply unit plugs

1

1 6

6.Connect the 4-pin power plug to the power connector of the floppy disk drive.

7.Connect the 4-pin power plug(s) to the power connector of the optical drive(s).

8.Connect the 4-pin power plug to the power connector of the hard disk drive.

Voltage selector

The PSU has a 115V/230V voltage selector switch located at the side of the power socket. Use this switch to select the appropriate voltage according to the voltage supply in your area.

If the voltage supply in your area is 100-127V, set the switch to 115V.

If the voltage supply in your area is 200-240V,

 

set the switch to 230V.

230

Setting the switch to 115V in a 230V environment will seriously damage the system!

40

Chapter 2: Basic installation