Asus T2-P •Power LED Lead, •ATX Power Switch, 12.Modem connector (10-1pin MDC), ASUS Terminator 2 barebone system, 13.System panel connector (8-1pin PANEL)

12.Modem connector (10-1 pin MDC)

This interface connects to the JP2 connector in the optional modem module.

			MDC
			1	PHONE
		GND		AC_SYNC
P4P8T	®	+3VSB		AC_SDIN1
		AC_RST#		GND
P4P8T MDC Connector		AC_SDOUT		MDC_BITCLK

13.System panel connector (8-1 pin PANEL)

This connector accommodates several system front panel functions.

IDE_LED

Power LED

IDE LED- IDE LED+ PLED-	PLED+
PANEL
Ground	PWR

ATX Power

Switch*

P4P8T ®

* Requires an ATX power supply.

P4P8T System Panel Connector

•Power LED Lead

This 2-pin connector connects to the system power LED. The LED lights up when you turn on the system power, and blinks when the system is in sleep mode.

•ATX Power Switch

This connector connects a switch that controls the system power. Pressing the power switch turns the system between ON and SLEEP, or ON and SOFT OFF, depending on the BIOS or OS settings. Pressing the power switch while in the ON mode for more than 4 seconds turns the system OFF.

ASUS Terminator 2 barebone system 83