Display
Reference S/W .4
4. Software Reference
Special Notes (Clone mode)These icons on the Display tab appear only under Clone mode
Click 
to make monitor adjustments to the primary display device in Clone mode.
Click
to make monitor adjustments to the secondary display device in Clone mode.
For example, if your secondary display device is TV, click the TV tab to adjust, among others, Contrast or Position of the TV display (see 4. Software Reference TV later in this section).
Change Resolution
Secondary Display Device in Clone/Windows 98 only
Change Resolution displays the Change Resolution box to let you customize a new resolution and refresh rate of the secondary display device in Clone.
NOTE: The following descriptions apply only to the secondary display device under Clone mode.
To customize a resolution or refresh rate or both
1.Click 
.
2.Click the Change Resolution pop- up button when it appears.
3.In the Change Resolution box, change the settings according to your preference and then click OK.
46 | ASUS V7100 Series User’s Manual |