4. Software Reference

TV

NOTE: This tab will not be available if your card is a pure model (cards without a TV Out connector).

Switch Device

Lets you assign hot keys to switch between devices.

Scheme

Scheme lists schemes that you can use to change the appearance of many screen elements simulta- neously. You can use existing schemes, or create and save your own scheme by saving your current settings, or delete unwanted schemes. You may want to save a scheme that you created for some special situations, such as when you want to use the same settings when playing a certain a movie.

Standard

Sets the TV signal format, for example, PAL or NTSC.

Black Level

Sets the brightness of the TV display.

Output type

Displays the connection status of composite and S-Video.

Contrast

Sets the contrast of the TV display.

Flicker Filter

Sets the anti-flicker effect.

Position

Sets the screen position.

Scan Type

Sets the scan type of the TV display. Overscan (default) bleeds the image off the edges of the picture tube of your TV. Underscan lets you compensate for overscanning TVs. Use Position to position or center the image in the TV screen.

Reference

Digital Flat Panel

NOTE: This tab will not be available if your card is a pure model (cards without a DVI connector).

The following options let you determine the placement of the image on your flat panel display when running at resolutions lower than the maximum resolution supported.

Use display adapter scaling

Lets your adapter do the scaling (default)

Centered output

Lets you center the image on the your flat panel and does not do any scaling.

User monitor scaling

Lets your monitor do the scaling. If your flat panel does not support this function, the image will be placed at the top left.

4. S/W

Display

ASUS V7100 Series User’s Manual

47